HIGH STRENGTH STEEL GEARS ... BECAUSE PLASTIC GEARS BREAK - That's Why You Are On This Page To Begin With !!!!
NOTE 1 : IF YOU ARE ORDERING A COMPLETE DRIVE UNIT (OPTION 2, $229.99) WE HAVE A LIMITED NUMBER OF CORES TO REBUILD. PLEASE EMAIL US TO CHECK THE LEAD TIME. IT CAN VARY DURING BUSY TIMES. IF YOU CAN SEND IN YOUR OWN UNIT, WE CAN REBUILD THAT IN A DAY AND SEND BACK.
NOTE 2 : If you are ordering a complete drive unit for a 2014+ pickup model please put that in the notes. The 2014+pickup models have a slightly different frame and use plastic drive unit top cap with circuit board. We can build it up for that but just need to know if ordering complete drive unit for 2014+ pickup model. Put that in the notes of the order please.
NOTE 3 : *** You Cannot Just Install a Metal Gear Without Also Changing The Motor To The GruvenParts INTERNALLY GROUNDED MOTOR ! You Will Short Out the Body Control Module. All Of Our Kits Come With New Motors Which Are Internally Grounded and Work With Metal Gears - So Don't Just Replace the Gear, You Must Replace Both Gear AND Motor When Going to Metal !!! ***
NOTE 4 : *** THESE ARE NOT FOR TOWING MIRRORS - PLEASE CLICK HERE FOR TOWING MIRRORS PRODUCT PAGE ****
DIY Library - Please Select Appropriate DIY for your Vehicle (Non Towing Mirrors!)
2007-2013 GM Silverado, Sierra, Tahoe, Suburban + 2014 Tahoe/Suburban
2014-2018 Sierra/Silverado
2015-2019 Tahoe/Suburban
Please visit this product page
Traverse/Acadia/Outlook - All Years Supplemental Instructions
** 2 Options Are Available ***
Note that if you chose Option 2, you will either need to send in your unit for repair directly, or wait approximately 2 months for us to get a unit to repair. These are becoming hard to find and people arent returning their cores as often anymore for some reason. We can usually repair sent in units same day to minimize down time as you cant install the mirror without the drive unit in place.
Option 1:
Buy strengthened steel gears machined integral to the main spiral shaft + hi-torque motor in quantity 1 set for 1 mirror or 2 sets for 2 mirrors ($64.99 / $99.99).
Option 2:
Buy a rebuilt complete motor drive unit with new hi-torque motor + steel integral gear already installed and tested ($229.99 minus $30 core return = $199.99). Please note when buying the complete drive unit, you must choose passenger side or drivers side, and there is a $30 core refund so be sure to send back your old assembly in repairable condition. Core returns are only applicable to complete drive units and when you are ready to return your core, please email paul@gruvenparts.com for instructions. Your CORE must be rebuildable. We cannot accept units which have parts other than the motor/spur gear broken as cores as we would have no way to rebuild them.
***** PLEASE NOTE WHEN ORDERING THE COMPLETE DRIVE UNIT - If you are in a hurry for this, its best to check with us to see if we have any cores. It could be 4-6 weeks to receive this, based on how many units we have in the shop. People do not send back their cores very quickly, so we are usually waiting. You can send in your own unit to be worked as well, and we will apply the $30 core when you send in and try to work it same day or very quick.
Other Parts Available :
We also carry a limited number of used parts to service these mirrors in case you loose or break something. We have some of everything, so just email paul@gruvenparts.com if you need something. We do now have some used mirror glass drive units for both sides - these are the little motorized units that actually adjust the angle of the mirror glass.
** Product Description **
GruvenParts.com is pleased to announce replacement strengthened STEEL gears and high torque INTERNALLY GROUNDED motors (OEM MOTOR WONT WORK WITH METAL) for the power folding mirrors on most 2007-Present GM trucks including Acadia, Traverse, Enclave, Escalade, Silverado, Avalanche, Tahoe, Suburban, Sierra, Yukon, and Denali. Also fits ALL 2007-Present GMC pick-up trucks. As many have discovered, the folding mirror assembly on these trucks suffers from a thin, weak, plastic spur gear mounted to the main drive shaft. The plastic spur gear cracks at the slightest impact or just wears out over time causing an inoperable folding mirror. The GM motors also get weak and die quickly. Unfortunately, GM will only sell you a complete folding mirror assembly, which will cost you from $700-$1,200 ea after labor and paint, depending on the year/make/model. And that $ would be wasted on another mirror assembly with another weak, plastic spur gear and weak electric motor that will also soon fail. Don't waste time or hard earned money on more GM parts that will also soon fail!
GruvenParts.com has addressed this issue by designing a strengthened integral spiral spur/worm gear shaft made from high strength steel to eliminate the fatigue cracking in the GM plastic gear. We have also designed a replacement high torque electric motor to accompany this new metal gear. Our new electric motor is required when switching out to the metal gear, as the ground circuit in the OEM motor does not allow for a metal gear to be installed. You can chose to buy the gear/motor combo for one or both sides or you can buy complete drive units which are rebuilt and already have the new metal gears and hi torque motor installed in them.
We have thoroughly tested our redesigned integral gear and high torque motor using a new, OEM mirror assembly and computerized test equipment. Our test samples barely showed any wear whatsoever, and the testing did include random wacks against the mirror, jamming the mirror operation as it was folding, and manually stressing the mechanism all in an attempt the break the gear. Each sample was tested more than 5,000 open/close cycles and was still going strong at that point !
This product carries a LIFETIME WARRANTY! Provided you don't burn the vehicle, or otherwise smash the mirror into something, you can send back the motor drive unit to us and we'll replace the gear assembly and get it working again free of charge. You would only be responsible for shipping under this warranty.
** Application **
Gears and Motors Fit Both Passenger and Drivers Side Power Folding Mirrors.
All 2007-Present GM Pick Up Trucks Including all Silverado and Sierra with Non-Towing Power Fold Mirrors -- please note the 2014+ pick up trucks used different plastics on the frame, so disassembly of the mirror frame doesnt match the previous gen DIY. The lower half of the drive unit with all the gears inside IS the same as the previous generation.
All 2007-2014 GM SUV's With Power Folding Non-Tow Mirrors Including Acadia, Traverse, Enclave, Escalade, Tahoe, Suburban, Yukon, and Denali.
This includes (but not limited to) the following mirror assembly part numbers :
25-83-12-36 (25831236), 25-77-98-49 (25779849)
This list of part numbers will continually grow as we build the interchange list. This is in no way complete, as most GM trucks made from 2007-2014 with power folding mirrors will use this gear. If your power folding mirror looks like the mirror shown in the DIY, this gear will fit your vehicle.
... We also have many more products for GM, including the towing mirror gears, 2015-Present SUV non-towing mirror gears, door lock motors, door handle inserts ! Check out the GM section of our website!
Previous | Showing reviews 31-40 of 619 | Next
Posted by Unknown on 17th Oct 2023
I replaced my gear from the seat..perfect fit...I finally decided to fix my mirrors and knew this is where I will find what I need..
Posted by Unknown on 26th Sep 2023
I already replaced the motor and gear in my driver side mirror about 5 years ago and that window is still working great. I knew when the passenger side mirror went out exactly where to go. Quality part and motor! It should have been made like this from the manufacturer. Definitely requires some skill and tools to complete the replacement unless you buy the motor and gear assembly refurbished from Gruven. Mirror is working great now. Thanks
Posted by E.Lo on 23rd Sep 2023
I bought the passenger motor drive unit. Just a note if you have an aftermarket side mirror (i.e. Ebay or Amazon) this unit will not work, at least in my experience. I was able to aquire a OEM side mirror, and it worked out. The video is informative. The hardest part is removing and installing the actual mirror. I would recommend this product. Whenever my driver side goes out I'll do the same thing and buy here.
Thanks
Posted by Stephen on 21st Sep 2023
I changed the drivers side about 6 months ago then the passenger side stopped working a couple weeks ago. Both plastic gears were cracked in the rotation mechanism so I decided to use Gruven motors and gears rather than OEM. While they make noise when operating I’m satisfied they will last. I especially want to compliment Gruvenparts for the fine video they produced! I referred to it often while R&R ing.
Posted by Unknown on 18th Sep 2023
Just installed rebuilt motor drive unit, but working like new. It is not noticeably louder than the other mirror.
Posted by JAM on 12th Sep 2023
Was a bit intimidated by the project at first but the step by step guide and instruction video together made for a pretty straight forward project. Completed in a couple hours. The mirror now folds in faster and is no doubt better than the plastic original equipment.
Posted by Carlos Martinez on 4th Sep 2023
My left mirror on my 2012 Chevy Silverado was not folding in. Ordered the complete assembly and installed it . Works great. Instuction video was very hepful. Just watch video before you star then as you go follow video and pause it until next step then keep going. Saved me some big bucks
Posted by Alex on 29th Aug 2023
Great experience overall. Easy installation with the instruction provided. Woks great! Totally recommend. I used in on a 2014 Escalade ESV.
Posted by Timo on 3rd Aug 2023
I purchased your replacement kit (motors and gears) for my 09 Silverado mirrors. The attached video was fantastic. It will take a couple of hours plus per mirror but absolutely worth it and better parts than original. Both of my original nylon gears were broken. Two suggestions: I sprayed the mirror tabs with WD 40 and it helped with the removal and assembly. 2nd, I was afraid I was going to break something on the frozen leads to the heated mirror connection. I cut the wires 2" away from the mirror and soldered and shrink tubed the new splice. Really easy and will save your project.
THANK YOU GRUVEN !
Posted by DH on 27th Jul 2023
This motor works perfectly. The shipping was fast and the part was an exact fit. Works twice as fast as the factory unit still on the other mirror. Would buy again.
ABOUT SSL CERTIFICATES |