Front Adjustable Swaybar End Links - VW MK5, MK6, Audi

Please Note : The Rod Ends used on these swaybar end links have studs which are 1" in thread length.  Please verify before ordering that this will work on your application.

Also, these swaybar end links are made a bit longer than stock.  This is because when lowering your vehicle, you will need to LENGTHEN your front swaybar end links to compensate for the change in suspension geometry.  These swaybar end links can be adjusted from 14.5" to 15.5" center to center length as shipped.  If you desire, you could also trim off part of the 2" long threaded ends to reduce center to center length to 12 3/4".  Please understand this before ordering and get an idea of what center to center length you desire to be certain these will work for your application.  You want the swaybar end links to sit as vertical as possible !

GruvenParts.com is happy to release these Billet Front Adjustable Swaybar End Link sets to replace OEM P/N's 1K0-411-315R, 1K0-411-315B, 1K0-411-315D, 1K0-411-315J, 1K0-411-315K, 1K0-411-315N, 1K0-411 315P (1K0411315R, 1K0411315B, 1K0411315D, 1K0411315J, 1K0411315K, 1K0411315N, 1K0411315P) for the Audi A3/S3/RS3 (8P and 8V)TT/TTS/TTRS (8J) MK2 and VW MK5 R32, Golf/Jetta MK5/MK6, Passat B7, Eos MKV/MKVI, and Tiguan 1 and 2.

We start with a center body made from 303 Stainless Steel hex bar to replace the flimsy non-adjustable OEM spaghetti links.  We then add super strong 6,000 lbs radial load capacity THK sealed ball joints with a proprietary PEEK liner on either end to provide many years of noise free operation.  The THK ball joints have a built in dust boot to seal out the elements and do not require any maintenance.  These linkages will not deflect under the hardest track corners and will provide the most accurate handling.  

These THK ends are NOT SIMPLY SPHERICAL ENDS.  These are tuned specifically for high vibrations found in swaybar end links using a proprietary PEEK liner not found in lessor ball joints.

All center sections are powder coated with a thick layer of either Gloss Black or Bilstein Jazz Blue - please choose during check out.

Our design allows simple and quick adjustment on the car.  Simply loosen the jam nuts at either end and spin the center body portion to lengthen or shorten, then retighten the jam nuts. 

This adjustable design will provide quick adjustment on the car, which is enough to handle all lowered (or raised) set ups.  You want the stabilizer bar end links to be as vertical as possible, perpendicular to the swaybar itself to avoid any loading in the fwd/aft direction.

Applications :

This product comes as a set of 2 adjustable end links and replaces OEM P/N's 1K0-411-315R, 1K0-411-315B, 1K0-411-315D, 1K0-411-315J, 1K0-411-315K, 1K0-411-315N, 1K0-411 315P (1K0411315R, 1K0411315B, 1K0411315D, 1K0411315J, 1K0411315K, 1K0411315N, 1K0411315P)

Audi A3/S3/RS3 (8P and 8V)

Audi TT/TTS/TTRS (8J) MK2

VW MK5 R32

VW Golf/Jetta MK5/MK6

VW Passat B7

VW Eos MKV/MKVI

VW Tiguan 1 and 2.

PLEASE CHECK YOUR OEM P/N BEFORE ORDERING TO ENSURE CORRECT FITMENT.