Loading... Please wait...
Product Description
*** BACK IN STOCK !! ***
GruvenParts.com is happy to release these Billet Front Adjustable Swaybar End Link sets for all Fiat 500 1.4L using OEM MOPAR front swaybar end link part number 68073033AB or 68073033AA or equivalent.
These beautiful adjustable sway bar end links are made from aircraft grade 303 Stainless Steel to replace the flimsy non-adjustable OEM spaghetti links. We then add super strong 6,000 lbs radial load capacity THK sealed ball joints on either end to provide many years of noise free operation. Our ball joints have a built in dust boots to seal out the elements and do not require any maintenance. If they ever do need to be replaced, they can replaced separately. These linkages will not deflect under the hardest track corners and will provide the most accurate handling.
All center sections are powder coated with a thick layer of either Gloss Black or Rosso Brilliante - please choose your color during check out.
Our design allows simple and quick adjustment on the car. Simply loosen the jam nuts at either end and spin the center body portion to lengthen or shorten, then retighten the jam nuts. This adjustable design will provide ~ +/- 1 inch of adjustment on the car (~10.2" to ~11.75" center to center length) which is enough to handle most lowered (or raised) set ups. You want the stabilizer bar end links to be as vertical as possible, perpendicular to the swaybar itself to avoid any loading in the fwd/aft direction. These can be shortened more if you want by trimming the threaded section down. Please keep at least 5 threads engaged into the spherical joints. This product comes with new attaching hardware.
Applications :
This product comes as a set of 2 end links and replaces OEM P/N's 68073033AB or 68073033AA or equivalent on Fiat 500L 1.4L
2012-2013 Fiat 500 1.4L and any others using the front sway bar end links P/N 68073033AB or 68073033AA or equivalent
Product Reviews
-
Gruven Endlinks for FIAT 500 Abarth
Posted by Ken on 15th Dec 2021
These worked out great and are a must have if you have lowered your car even just a little bit. I lowered mine .7" and these took out the very slight clunk I was experiencing and keeps the car flatter in turns. Even just preloading the sway bar that little bit was detrimental to the handling and the Gruven endlinks sorted it out correctly.
-
High Quality
Posted by Thomas Reimel on 1st Oct 2021
Once again, Gruvenparts supplies a superior quality product. Cheap they're not, but these are supremely well made and have the adjustability you need if you change the front suspension of your car (in particular a changed swaybar, lowering springs ore coil-overs--really, anything that may change the ride height). You won't be disappointed in these units.
-
Beefy links!
Posted by MArk on 27th Apr 2016
Had installed aftermarket MADness springs 1.4" drop. Felt front of car pulling sideways a bit when going over large bumps. These links corrected the problem, in addition to being stronger than OEM. Like the fact each balljoint can be individually replaced. How to determine the swayer was level, though? Tried 1" shorter length than OEM link. So far very pleased with balanced handling over rough roads, which are plentiful in Calgary!
-
Great engineering and quality parts
Posted by Edwin Barron on 24th Jan 2015
Hello,
I just want to say thank you as I just received my Gruven front adjustable swaybar end links for my 2012 Fiat Abarth and they are really great. This component is a huge improvement over the OEM pieces and look great on the car.
The ease of installation together with the great quality finish make this a must upgrade for any FIAT 500. In addition, I now feel that my swaybar is properly set up, now that the car is on a lowered suspension, with these end links.
Thank you again for the great service,
-- Response from GruvenParts --
Many thanks for the review, Edwin. Please post pics on Fiattech and Fiat500 forums, we would love to see your vehicle ! Now go stomp some BMW's at a track day !!