Loading... Please wait...
Product Description
These are BACK in stock, for a limited time only. This could be last run of these vent fix kits so get 1 now if you need 1. The kit fixes all 4 vents, enough for complete vehicle!
GruvenParts.com is happy to release this dash vent fix kit for all 1989-1992 Corrado G60 and SLC.
These plastic replacement linkages replace the OEM brittle rubber molded linkages that position the slats on the vents. Once the OEM linkages fail, the slats on your vents flop around and no longer direct vent airflow correctly. This is a common issue that Tek Euro saw fit to fix and we are happy to distribute for them.
This product fits all 1989-1992 Corrado G60 and Corrado SLC with the "old style" vents (all Corrado with non-rotary style HVAC controls).
Please click here for installation instructions.
Product Reviews
-
tricky fix
Posted by John Dixon on 31st Jan 2022
So with the help of a you tube video I managed, in a couple hrs, to install the new parts
-
An investment well worth it!
Posted by Dan Sutherland on 3rd Dec 2021
These are perfect for fixing those crazy broken vents. I was getting so frustrated with them flopping around!!
I am thrilled with the results!!
It is a bit of a time consuming process, but that isn't Gruvens fault, blame VW for that, lol.
-
Corrado vent fix kit
Posted by chris on 28th Jul 2021
Works perfect to fix the floppy vents once the OEM parts disintegrated after 30+ years of use. Gives it a nice stiff back to new feeling. Instructions could have been a little clearer but once you get the vents apart it all made sense. Thank you for helping get my car back to 100%!
-
Works Great! Another permanent fix from Gruven
Posted by Les Noriel on 22nd May 2021
While browsing for other parts, I stumbled across this Dashboard Vent fix for early Corrados. I didn't even know I needed this. So I rushed out to my car and sure enough--all four dashboard vents were broken.
At $54.99, I balked at the price. But when I actually got the part and installed them, I realized just how important these little replacement pieces are in preserving the functionality of our aging classic cars.
As a side benefit, repairing this part made me clean up decades of dirt and grime which had accumulated in my vents.
I've seen alternative fixes on Youtube but this fix is superior. This is an actual permanent repair over the original fragile plastic that came from the factory.
Excellent part. A must-have if you own an early Corrado/B3 Passat and plan on keeping it in the long term.
-
Permanent Fix - Hard to Install
Posted by Unknown on 25th Sep 2018
This will be a permanent fix for your vents, but it is very difficult to install. You will have to be very PATIENT. Don't give up! You will also have to use a fair amount of force to get the vents apart. They won't break, if you apply the force smoothly. I used dielectric grease instead of soapy water. Also, I installed the keeper onto the middle vertical first and then installed the other verticals. Install into the keeper, then the bottom post, then the top post. On my car, the passenger side vent was the hardest.
-
It works!
Posted by Victor on 28th Apr 2018
I found the dash vent kit repair looking for a spare part for my Corrado vents. It takes a little time to put in place but it works. The system is better than the original piece that keeps the vents in place.